Mahindra 1710A | Backhoe
Product Overview-
1710A Overview
Mahindra's 1710A Backhoe is built specifically for the 1815 HST tractor model. It has a heavy-duty bucket with formed cutting edges and 3 horizontal wear bars. Mahindra's formed console gives unit a modern appearance and greater comfort to operator. Has a 2-year limited warranty.
Download Complete Specifications (PDF)
Features
-
- Dedicated hydraulic valve with dual plus axis levers
- Formed console gives unit a modern appearance and allows improved comfort to operator
- Double acting cylinders - Bucket = 2.00 Bore x 1.12 Rod; Lift = 2.50 Bore x 1.25 Rod; Dipper = 2.25 Bore x 1.12 Rod; Stabilizer = 2.25 Bore x 1.12 Rod; Swing = 2.50 Bore x 1.12 Rod
- Cushioned, orificed and port reliefs are designed into the swing cylinder circuit allowing for smooth operation of backhoe
- Heavy duty swing frame
- Backhoe valve is positioned low to operator. This allows less heat and noise to be transferred into operators area
- Standard duty buckets with heavy duty cutting edges. Buckets are available in three sizes: 10, 12 and 16
- SAE O-ring, Flat face O-ring, and JIC hydraulic connections are used on this unit to reduce potential hydraulic leaks
- Under frame Mounting System mounts to the center and rear end of tractor. Some 3-point linkages must be removed with backhoe installed. When backhoe is parked 3-point components can be reinstalled
- Quick on and off: pull two quick pins and back away (See detailed instructions in this manual)
- High strength steel with box tubing dipper assembly
- High back comfortable seat
-
-
Features and specifications are subject to change without notice
The 1710A is compatible with the following tractors:
-
-
Engine HP:
-
Key Uses
